GOWIN Titanium
Metal Seated
Ball Valve
Solutions
When standard valves fail in corrosive, high-temperature, or high-cycle severe service — GOWIN's metal-to-metal seated ball valves with proprietary T3-hardened Ti-12 titanium alloy keep your pipeline running. Trusted by distributors across the Middle East, West Africa, and Southeast Asia.
Solving Severe Service Failures with Titanium Metal Seated Ball Valves
If your clients are dealing with premature valve failure in corrosive media, seized seats at high temperature, or unacceptable fugitive emissions — the answer is not a better soft-seated valve. It is a fundamental change in sealing technology.
GOWIN's titanium metal seated ball valves eliminate polymer seats entirely, replacing them with T3-hardened Ti-12 titanium alloy ball-and-seat pairs that maintain zero-leakage metal-to-metal contact across conditions that destroy standard designs.
Metal Seated vs. Soft Seated Ball Valves — Which Do You Need?
| Feature | Soft Seated | Standard Metal Seated | GOWIN Titanium Metal Seated |
|---|---|---|---|
| Max Temperature | ~200°C | ~450°C | 650°C |
| Corrosion Resistance | Low | Medium | Exceptional |
| Surface Hardness | — | HRC 60–65 | HV 2200 (T3 Process) |
| Wear Life | Low | High | >10,000 cycles |
| Fugitive Emission | Moderate | Low | ISO 15848-1 CO1 ✓ |
| Fire Safe | Optional | Optional | API 607 Full Range ✓ |
| Corrosion Rate (98% H₂SO₄) | — | — | 0.037–0.077 mm/a ✓ |
T3 Titanium Surface Hardening — The Science Behind Zero-Leakage Metal-to-Metal Sealing of GOWIN
Most manufacturers apply HVOF coating onto carbon or stainless steel valve bodies — a process widely available and easily replicated. GOWIN's T3 is different in both material and method. We perform ion diffusion combined with PVD treatment in a controlled vacuum environment, directly on Ti-12 titanium alloy base material.
The result is a compound hardened layer that no off-the-shelf coating process can match: ultra-high surface hardness, near-zero porosity, and full preservation of titanium's corrosion resistance — all in one structure.
T3 Process — 4 Steps
T3 Performance Data
| Parameter | T3 Result | Standard Ref. |
|---|---|---|
| Surface Hardness | HV 2200 ✓ | HRC 68–72 |
| Layer Thickness | >100 μm ✓ | 0.3–0.5 mm |
| Bond Strength | >12,500 PSI ✓ | ~10,000 PSI |
| Porosity | <1% ✓ | ~2% |
| Friction Coefficient | 0.08 | ~0.12 |
| Cycle Life | >10,000 ✓ | — |
| Corrosion Rate (98% H₂SO₄) | 0.037–0.077 mm/a | 0.186 mm/a |
VDI 3198 ✓
Measured ✓
Nano Ind. ✓
Metal-to-Metal Seated Ball Valve — Engineering That Solves the Problem at the Source
Every sealing challenge in severe service has a specific engineering answer. Here is how GOWIN's titanium metal seated ball valve addresses each one.
Inlet Seat — Spring-Loaded,
No Ball Seizure at High Temperature
Outlet Seat — Detachable,
Rated to 650°C Pure Metal Seal
Self-Cleaning Scraper —
Keeps the Sealing Surface Clean on Every Stroke
Low-Emission Stem Seal —
ISO 15848-1 Compliant, Zero Stem Deflection
Severe Service Metal Seated Ball Valves — Built for Your Industry
Corrosive Media, Sour Gas, Refinery Slurry
Corrosive crude, sour gas (H₂S), sulfuric acid injection, refinery slurry — environments where polymer seats and standard stainless steel valves fail on predictable schedules. GOWIN's titanium metal seated ball valves are deployed by distributors serving operators across the Middle East, West Africa, and Southeast Asia, where field-proven T3 hardened surfaces resist chemical degradation that defeats conventional designs.
Concentrated Acids, HCl, Chlorine Gas
Concentrated sulfuric acid (98%), HCl, chlorine gas, and aggressive solvents corrode stainless steel valves within months. GOWIN's corrosion-resistant titanium ball valves — validated at 0.037–0.077 mm/a in 98% H₂SO₄ at 60°C — give distributors a reliable isolation solution that lasts years, not months.
Iron Ore Slurry, Copper Leaching, Coal Washing
Iron ore slurry, copper leaching circuits, and coal washing operations demand simultaneous resistance to abrasion and chemical attack. GOWIN's T3-hardened V-shape segment hard seal valves handle wear loads that destroy standard metal seated designs, serving distributors in West Africa, Brazil, Chile, and Southeast Asia.
Chloride Corrosion, High-Pressure, Fire-Safe
Offshore applications combine high chloride corrosion, high-pressure service, and non-negotiable fire-safe requirements. GOWIN's BV Marine & Offshore certified titanium ball valves — API STD 607 fire-safe, ISO 15848-1 compliant — are qualified for FPSO topside and platform applications serving operators in the Middle East and West African offshore fields.
High-Temp Steam, Coal Powder, FGD Systems
High-temperature steam lines, coal powder transport, and flue gas desulfurization systems need valves that cycle thousands of times per year at temperatures exceeding 450°C — without seat degradation. GOWIN's spring-compensating metal seated ball valves maintain consistent sealing performance from commissioning to end of service life.
Chlorinated Water, Desalination Brine, Chemical Dosing
Chlorinated water, seawater desalination brine, and chemical dosing lines create pitting and crevice corrosion in standard stainless steel valves over time. Titanium's electrochemical stability eliminates this failure mode entirely — giving water treatment operators years of maintenance-free service.
Why Distributors in 20+ Countries Choose GOWIN for Titanium Ball Valves
Proprietary T3 Technology — Impossible to Source Elsewhere
T3 is not a service you can order from a coating shop. It is GOWIN's in-house process developed specifically for Ti-12 titanium alloy — delivering HV 2200 hardness with a corrosion rate 5× lower than untreated titanium. A competitive edge your clients will feel in the field.
Full-Range Fire-Safe — Every Valve Type, Every Size
API STD 607 fire-safe certification covers GOWIN's entire ball valve range — floating, trunnion, fully welded, and top-entry. Not just selected sizes. Every project tender your clients submit passes fire-safe checks without exception.
Technical Drawing Support — From Spec to Design
GOWIN is one of the very few titanium valve manufacturers that provides technical drawing support — reviewing client specifications and producing design drawings for non-standard configurations, removing a critical bottleneck for distributors handling FEED and EPC projects.
In-House Lab + Third-Party Inspection Ready
Every valve passes GOWIN's complete in-house QC chain — PMI, NDT (RT/PT/MT/UT), and API 598 pressure tests. Third-party inspection by TÜV SÜD, Bureau Veritas, or Applus China arranged on request — full traceability for the most demanding project audits.
Delivery Commitments We Actually Keep
When an Algerian infrastructure project left only one month for production after two months of technical review, GOWIN delivered on time — zero quality compromise. Our production culture is built around the reality that your clients' timelines do not pause for manufacturing delays.
Distributor-First Model — We Do Not Compete With You
GOWIN works exclusively through distributors and agents — not direct to end users. Our global team includes local representatives in Oman, Spain, Iran, and Southeast Asia, backed by 40+ English-speaking staff in Wenzhou.
"Our mission is to provide the most effective and high-quality valve products in design, production, and application for various industries. With close collaboration with our clients, GOWIN's products effectively cater to diverse industry needs while showcasing the true value of China's top-tier industrial performance in the world."
— Simon Li, CEO, GOWIN B&C Group · ONE TEAM, FOR DREAM, GO WIN!Certified Metal Seated Ball Valve Manufacturers — Quality You Can Audit
Certificate Wall
6D-2037
TÜV SÜD
Offshore
DNV Certified
CO1 Class
Full Range
Third-party verified by TÜV SÜD · Bureau Veritas · Applus China
Key Test Data
| Test Item | Medium | Pressure | Result |
|---|---|---|---|
| Body Strength | Water | 1.5 PN | ✓ Pass |
| High-Pressure Seat Seal | Water | 1.1 PN | ✓ Pass |
| Low-Pressure Seat Seal | Gas | 0.6 MPa | ✓ Pass |
| DBB Function | Water | 1.1 PN | ✓ Pass |
| Cycle Life (TAT) | N₂ | 1.0 PN | 500 cycles ✓ |
| High Temp Performance | N₂ | 100% PN | +120°C ✓ |
| Low Temp Performance | N₂ | 100% PN | -50°C ✓ |
| Antistatic Test | — | — | ≤10Ω ✓ |
Frequently Asked Questions — Titanium Metal Seated Ball Valves
What is the difference between metal seated and soft seated ball valves?›
What makes titanium better than stainless steel for corrosive media?›
What is GOWIN's T3 surface hardening process?›
What pressure and temperature ranges do your titanium ball valves cover?›
Are your titanium ball valves fire-safe certified?›
Can you supply trunnion mounted titanium metal seated ball valves?›
Do you support OEM / custom drawing orders?›
What fugitive emission standard do your valves meet?›
What is your typical delivery time?›
Which regions and industries do you primarily serve?›
Contact us
CHINA
LIBERIA
FRANCE
BARBADOS
KIRIBATI
